Hot Water Recirculating Pump, 93W, 110V Water Circulator Pump, Circulation Pump, 3/4″ G Thread to 1/2″ NPT Brass Adapter, Stainless Steel Head, 3 Speed Control for Electric Water Heater System
Stainless Steel Material: Our recirculating pump is constructed with a heavy-duty stainless steel pump head, aluminum pump housing, and PES impeller, rust-proof, waterproof. Brass fittings and water-stop will come with the pump for corrosion-proof and leakage-proof. Note: The brass adapter has a 3/4″ G thread diameter and is compatible with 1/2″ NPT.
Large Flow & Quiet Running: Powerful circulator pump has max. 40 L/min water flow, max. 10 bar pressure and max. 20 ft head lift. In addition, super silent running property(about 25dB) can provide you with a quiet pump: high performance but low noise.
Adjustable Speed Switch: This water circulator pump features a three-power control switch in 46/67/93W. It is convenient for you to adjust the flow rate as your different requirements.
Easy Installation: Our circulating pump for hot water can be used directly to drinking water pipelines with a wrench, fitting with an NPT 3/4" inlet/outlet hose. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of the pump should be kept horizontal after installation.
Wide Application: The recirculating hot water pump is suitable for many applications, such as city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating system, water heater system and so on.
Product Specification
Protection Level: IP44
Bearing Material: Carbon
Body Color: Green/Silver
Insulation Class: F
Impeller Material: PES
Max. Pressure: 10 Bar/ 145 Psi
Pump Head: Stainless Steel
Product Size: 5.1x4.6x4.7 in / 13x11.7x12 cm
Pump Housing: Aluminum
Noise Level: 25dB
Max. Head Lift: 20/16.5/10ft (6/5/3 m)
Rated Pressure: 0.6 Bar / 8.7 Psi
Mounting Position: Shaft Horizontal
Ambient temperature: 32~104℉/0~40℃
Max. Flow Rate: 10.5/7.4/5.3 Gpm(40/28/20 L/min)
Voltage: 110V/60HZ
Inlet/Outlet Dia.: 3/4" G Thread (Note: The brass adapter has a 3/4″ G thread diameter and is compatible with 1/2″ NPT)
